轧机两侧刚度差的数字化分析与改善措施

轧机两侧刚度差是轧机功能精度的最重要指标之一，以弹跳方程为基础定量计算了轧机两侧刚度差对轧制稳定性的影响，主要包括调平值、调平值随轧制力的变化以及甩尾3个方面。以此为基础在某热轧线建立了轧机刚度评价体系，对轧机功能精度进行管控。同时，还分析了轧机两侧刚度差的影响因素，并在定量分析的基础上采取了一系列的改善措施，包括衬板、垫片维护、最大压靠轧制力和标定轧制力的调整等，使轧机刚度和轧制稳定性得到大幅提升。     

气控环形防喷器密封胶芯大变形分析

针对气控环形防喷器胶芯在密封过程中的大变形以及与油管存在密封压力难以计算的问题,建立胶芯物理模型,结合厚壁筒理论与橡胶本构方程,同时考虑胶芯的材料非线性和几何非线性,探讨防喷器密封过程中胶芯变形与接触压力的变化。根据胶芯变形过程中无变形阶段、自由变形阶段和接触变形阶段的不同受力状况,利用迭代的方法对每个离散微段施加控制压力,得到不同控制压力下胶芯变形量与接触压力,并与仿真结果进行比较。结果表明:在自由变形阶段,随控制压力增加,胶芯变形量逐渐增大且由中间向两侧逐渐减小;在接触变形阶段,胶芯内径保持不变,且与油管间接触压力不断增加。采用胶芯变形理论方法计算的接触压力变化规律与仿真结果基本相同,验证了胶芯变形理论计算方法的正确性。     

Does placebo effect exist in contact lens discomfort management?

PurposeTo study the effect of daily disposable contact lens (DDCL) refitting in monthly contact lens (CL) wearers suffering from contact lens discomfort (CLD), and to assess if there is a placebo effect associated with this CLD intervention.MethodsSymptomatic CL wearers, according to the Contact Lens Dry Eye Questionnaire 8 (CLDEQ-8 ≥ 12 points), were divided into two groups. The study group was provided with DDCLs (delefilcon A) and the control group with a masked pair of their habitual monthly CLs (placebo effect) and were assessed after one month. Then, the control group was provided with the same DDCLs and evaluated one month later. The symptoms were recorded with the CLDEQ-8 and global rating of change scale (GRCS). Non-invasive tear break-up time (NITBUT), conjunctival hyperaemia, fluorescein staining, and lid wiper epitheliopathy (LWE) were evaluated. Changes between visits, groups, and the effect of each intervention were analysed.ResultsThirty-one participants (mean age: 23.2 ± 5.3 years) were recruited. The study group (n = 14) showed an improvement of -39.6 ± 25.8 % (p < 0.001) in CLDEQ-8 and 31.3 ± 14.6 points in GRCS (p < 0.001) after one month of DDCL use, while no changes in clinical tests were found. In the control group (n = 17), symptoms improved significantly after wearing the masked monthly CL (CLDEQ-8: -26.1 ± 31.0 %, p = 0.03; GRCS: 14.9 ± 17.0, p = 0.002), however a worsening in bulbar (26.5 ± 40.0 %; p = 0.02) and limbal hyperaemia (21.6 ± 34.7 %, p = 0.02) and an improvement of -19.1 ± 37.0 % (p = 0.049) in LWE was found. When the control group was fitted with the DDCL, improvements in GRCS (20.5 ± 25.5, p = 0.02), NITBUT (37.9 ± 42.3 %, p = 0.002), and conjunctival staining (-47.1 ± 59.9 %, p = 0.005) were noted.ConclusionsRefitting symptomatic monthly CL wearers with Delefilcon A DDCL is effective in reducing symptoms related to CLD. However, clinicians and researchers must be aware of the existence of a placebo effect when assessing the effectiveness of any CL refitting.     

径向弹簧蓄能密封结构最大接触应力的有限元分析

为研究径向弹簧蓄能密封结构的密封特性，针对典型径向弹簧蓄能密封结构，分析其密封机制以及O形弯曲金属螺旋弹簧的弹性特性；采用ANSYS有限元分析软件，建立典型弹簧蓄能密封结构的非线性有限元分析模型，对弹簧蓄能密封圈在不同压缩率、不同介质压力下的接触应力进行分析，研究在多种工况下最大接触应力的变化情况。结果表明：压缩率保持不变时，最大接触应力随着介质压力的增大而增大；介质压力保持不变时，随着压缩率的增大，最大接触应力先增大再减小。对压缩率、介质压力与最大接触应力的关系进行曲线拟合，可用于指导弹簧蓄能密封结构的精确设计。     

接触器触头系统振动机理分析及算法优化

为了解决合闸过程中动、静触头接触引起的振动弹跳问题.本文建立了接触系统的二自由度运动微分方程,并利用遗传算法对交流接触器吸合过程进行优化,同时通过高速摄影实验对接触弹跳的全过程进行了观察和分析.结果表明:理论与实验结果高度一致,铁心在触头分离前发生碰撞,进一步加剧触头弹跳;铁芯弹跳再次碰撞时,触头的弹跳不受影响;在接触器运行过程中,动铁芯的运动会引起系统轻微振动;采用遗传算法优化的接触器触头弹跳时间和最大振幅均减小.研究结果为进一步控制和减小接触弹跳提供了理论依据.     

烟炱对电接触磨损的影响

选用常见的铜作为电接触材料,将烟炱溶液喷洒于试样表面,进行不同载荷下的电接触微动试验,用3D形貌仪和SEM对磨痕形貌进行分析。结果表明:载荷对材料的电接触性能影响显著,接触电阻与法向载荷成反比,即增加载荷可改善摩擦副的电接触性能;接触区域的有效导电面积是有限的,故载荷达到某一值后,随着载荷的增加,接触电阻不再有明显的下降趋势;小载荷下,烟炱的加入恶化了摩擦副的电接触性能,随着载荷的增加,这种恶化作用逐渐减小;摩擦因数随着载荷的增加而降低,载荷较低时(2～6 N),摩擦因数曲线可见明显的上升期、跑合期、下降期、稳定期;而载荷较高时(8～10 N),只有上升期和稳定期;大载荷下,触头接触区域匹配良好,摩擦副表面迅速达到了平衡点,摩擦因数较稳定。在电化学的作用下烟炱颗粒在摩擦副表面形成固体膜,起到减摩抗磨的作用。     

Saccharomyces cerevisiae and Hanseniaspora uvarum mixed starter cultures: Influence of microbial/physical interactions on wine characteristics

The growing trend in the wine industry is the revaluation of the role of non-Saccharomyces yeasts, promoting the use of these yeasts in association with Saccharomyces cerevisiae. Non-Saccharomyces yeasts contribute to improve wine complexity and organoleptic composition. However, the use of mixed starters needs to better understand the effect of the interaction between these species during alcoholic fermentation. The aim of this study is to evaluate the influence of mixed starter cultures, composed by combination of different S. cerevisiae and Hanseniaspora uvarum strains, on wine characteristics and to investigate the role of cell-to-cell contact on the metabolites produced during alcoholic fermentation. In the first step, three H. uvarum and two S. cerevisiae strains, previously selected, were tested during mixed fermentations in natural red grape must in order to evaluate yeast population dynamics during inoculated fermentation and influence of mixed starter cultures on wine quality. One selected mixed starter was tested in a double-compartment fermentor in order to compare mixed inoculations of S. cerevisiae/H. uvarum with and without physical separation. Our results revealed that physical contact between S. cerevisiae and H. uvarum affected the viability of H. uvarum strain, influencing also the metabolic behaviour of the strains. Although different researches are available on the role of cell-to-cell contact-mediated interactions on cell viability of the strains included in the mixed starter, to our knowledge, very few studies have evaluated the influence of cell-to-cell contact on the chemical characteristics of wine.     

基于等切共轭的弧齿锥齿轮差曲面建立与解析

对弧齿锥齿轮提出了一种新的共轭求解方法，来更方便地求解共轭小轮的齿面方程，在此基础上进行了齿面接触分析。在分析过程中提出了一种新的ease-off差曲面计算方法，即用对应点的转角误差替代直线误差进行差曲面求解，使得传动误差解析、齿面修形量的确定更为直观和准确。提取了ease-off曲面上的差曲线，以方便地确定出接触路径和边缘接触点。根据全程差曲线得到了齿面接触印痕分布情况。     

无扩口导管拧紧力矩对其密封性能的影响

以某型飞机中无扩口液压导管为研究对象,结合飞机液压导管实际安装以及保压工况,利用有限元软件ANSYS中多线性随动强化来模拟导管弹塑性本构模型;对处于不同安装力矩以及恒定压力下的导管连接件进行仿真分析,研究安装力矩对导管管接头处的应力应变以及密封性能的影响,并给出参考安装力矩。构建液压导管安装试验台,利用力矩扳手采集拧紧力矩值并使用液压油车对导管进行加压试验,验证不同安装力矩对导管管接头密封性能的影响。结果表明:导管与卡套之间的胀形区域产生的大变形以及应力集中是引起导管管接头渗漏的主要原因之一;所提出的密封性能仿真方法可以较为准确地模拟拧紧力矩与密封性能的关系,为实际工程中导管安装提供依据。